Electronic Components Ⅲ
Back to Home
->
Prototype
->
Metal Part Ⅲ
A Metal Parts List
Note・・・1：Material,2： Finish, 3：Processing
C1100-1/2H t=0.5
-
(blank) Wire EDM
(bending) Simple die + Standard die
C1100-1/2H t=0.8
-
(blank) Wire EDM
(bending) Simple die + Standard die
C2680-H t=0.64
Sn-Re plating (plating ahead)
(blank) Die(blanking)
(bending) Simple die + Standard die
C1100-1/2H t=2.0
Cu-Ni plating (post-plating)
(blank) Wire EDM
(bending) Simple die + Standard die
SUS304CSP-1/2H t=0.3
-
(blank) Microscopic Laser Processor
(bending) Simple die + Standard die
SUS304CSP-1/2H t=0.3
-
(blank) Microscopic Laser Processor
(bending) Simple die + Standard die
SUS304CSP-1/2H t=0.2
-
(blank) Etching
(bending) Simple die
Menu
Metal / Resin Sets
Original Simple Die-sets
Microscopic Laser Processing
Miniature Stamping
Electronic Components Ⅰ: Metal
Electronic Components Ⅱ: Resin
Electronic Components Ⅲ
Electronic Components Ⅳ
Drawing Parts
Various Mechanical Parts
Electronic ComponentsⅠ: Metal
Connectors, Relays, Switches, Motors, Antennas, etc.
Electronic ComponentsⅡ: Resin
Housing, Base, Connectors, Switches, etc.
Electronic ComponentsⅢ
Lead Frames, Backlights, Power Modules, etc.
Electronic ComponentsⅣ
Covers, Shield Cases, etc.
Drawing Parts
Circular Drawing, Square Drawing, Complex shaped Drawing, etc.
Various Mechanical Parts
Vehicle Components, Industrial Machine Parts, etc.
Fin Stamping
Offset Fins, Corrugated Fins, etc.
No More Die Casting
Low-Costs, Weight-saving,etc.
One-shot Deep Drawing
Suitable for a Need of Strength,etc.
