Metal Insects Series


Metal Insects Series

"14th Precision Sheet Metal Technology Fair"
Received the Gold Award for High Precision Small Part
LADYBUG

てんとう虫

【Material】
・Metal : SUS304/Thickness 0.05

"15th Precision Sheet Metal Technology Fair"
Received the Gold Award for High Precision Small Part
BUTTERFLY

蝶

【Material】
・Metal : SUS304/Thickness 0.1

"16th Precision Sheet Metal Technology Fair"
Received the Technical Award for High Precision Small Part
WATER STRIDER

アメンボ

【Material】
・Metal : Magnesium/Thickness 0.13

"18th Precision Sheet Metal Technology Fair"
Received the Technical Award for Formative Arts Fabrication
DRAGONFLY

トンボ

【Material】
・Metal : SUS304/Thickness 0.1

"19th Precision Sheet Metal Technology Fair"
Received the Technical Encouragement Award for Formative Arts Fabrication
MANTIS

カマキリ

【Material】
・Metal : Brass/Thickness 0.1~0.4

"20th Precision Sheet Metal Technology Fair"
Received the Technical Encouragement Award for Formative Arts Fabrication
BEETLE

カブトムシ

【Material】
・Metal : SUS304/Thickness 0.1~0.3

"26th Precision Sheet Metal Technology Fair"
Received the Special Encouragement Award
HORNET

蜂

【Material】
・Metal : SUS304/Thickness 0.1
・Mold : LCP
【Plating】
・Gold

An Example of Processing Thin Sheet Metal 【Dragonfly】

薄板金属加工事例 「トンボ」

These insects which are made from one piece of sheet metal are indicated our core-competences in the field of thin sheet metal manufacture. We think of insect as micro machine, which is able to locate what they search even in the darkness.

The metal insects series require tremendous precision. The dragonfly as a picture on the right side, the material is SUS 304-CSP and the thickness is 0.05mm. The tolerance is ±0.05mm. The processing time is 30 minutes par one. It is remarkable that techniques of mass production are used (not those of prototype).

Our high techniques can be seen in designing and manufacturing simple die-sets in low-costs and short delivery.
Mass-production techniques are applied to stage of prototype.

An Example of Processing Thin Sheet Metal 【Butterfly】

薄板金属加工事例 「蝶」

We image a real butterfly in designing and making. The patterns and wings are connected and moved as one.
When the butterfly stands on a branch, its patterns are opened. And when it flies away, one is closed and the other is opened.
The material is SUS304 and the thickness is 0.1mm.
The tolerance is ±0.1mm.
Processing time is about 20 minutes par one.


Contact us

  • Kyoto:+81-75-312-8775
  • E-mail Address
  • Get a Quote

The Samples of Metal/Resin sets

Metal Part Ⅰ
Electronic ComponentsⅠ: Metal
Connectors, Relays, Switches, Motors, Antennas, etc.

Resin Parts Ⅱ
Electronic ComponentsⅡ: Resin
Housing, Base, Connectors, Switches, etc.

Metal Part Ⅲ
Electronic ComponentsⅢ

Lead Frames, Backlights, Power Modules, etc.


Metal Parts Ⅳ
Electronic ComponentsⅣ
Covers, Shield Cases, etc.

Drawing Processing
Drawing Parts
Circular Drawing, Square Drawing, Complex shaped Drawing, etc.

Mechanical Components
Various Mechanical Parts
Vehicle Components, Industrial Machine Parts, etc.

Mechanical Components
Plate Spring
Manufacturing from 1 piece by using general-purpose die sets.

  • What’s the our KNOW-HOW?

The Examples of Difficult Processing Products

Making Fins by Stamping
Fin Stamping

Offset Fins, Corrugated Fins, etc.


The Change of Method
No More Die Casting

Low-Costs, Weight-saving,etc.


Original Deep Drawing
One-shot Deep Drawing
Suitable for a Need of Strength,etc.

Kyoto Japan


Top Page